Results Per Page | Showing 1-6 of 6 Results
| 1
Answer:
All Alarm Lock Trilogy Exit Trim locks (e.g., models ETDL27, ETPDNiRX, ETPDLN) may use an external power source, if desired. This external power source must be rated 7.5VDC on a non-switched supply. The power wires can be routed through...
View Answer
Answer:
For all non-Networx cylindrical locks:
...
View Answer
Answer:
An Ambush Code is a special code entered at the lock keypad when a user is forced to unlock a locking device. The device unlocks but sends a silent alarm (with no indication at the keypad). The Ambush Code can be used to trip a relay, to alert...
View Answer
Answer:
1. With the lock removed from the door, note the position of the half-moon shaped notch located in the spindle bushing (see arrow in the image below).
...
View Answer
Answer:
When a valid code is entered and the batteries are weak, all Alarm Lock Trilogy locksets sound a special low battery indication. We strongly recommend that weak batteries be replaced as soon as this indication is heard. However, if weak...
View Answer
Answer:
DL-Windows software allows you to connect your PC with your lock. Although DL-Windows cannot make your lock a wireless lock; however, the following locksets have wireless capability:
...
View Answer
40 Results Per Page | Showing 1-6 of 6 Results
| 1
