FAQs
How do I change the "Pass Time" on my Alarm Lock T2 series door lock?
The "Pass Time" is the duration the lock stays unlocked after a valid User Code entry.
You can change the Pass Time from 02 to 20 seconds (factory default is 5 seconds). Note: The Pass Time will also determine the amount of time allowed between keypresses during programming. In addition, be aware that ONLY the Master Code can use this option.
When changing the Pass Time, there must be 2 digits after the "4" in the following sequence.
Example: Change the Pass Time to 13 seconds:
- Enter the Master Code > AL > 4 1 3 > AL